Filter

Indexable Milling

Indexable End Mills

Indexable Milling Cutters

Showing 204 items

content loaded
Ball Nose End Mill, 1/8 in Cutting Dia, 3 in Overall Length, 1/8 in Shank Dia, P38 Lightning
Approved Vendor
Ball Nose End Mill, 1/8 in Cutting Dia, 3 in Overall Length, 1/8 in Shank Dia, P38 Lightning

Part #

P38-005146

MFG Part #

P38-005146
Iscar 3101605 Indexable End Mill, 1-1/4 in Cutting Dia, Flat, Weldon Shank, 3M AXKT 1304/2006 Insert, Right Hand Cutting, 1-1/4 in, 90 deg Lead Angle, 1/2 in Maximum Depth of Cut, Through Coolant (Yes/No): Yes
Iscar
Iscar 3101605 Indexable End Mill, 1-1/4 in Cutting Dia, Flat, Weldon Shank, 3M AXKT 1304/2006 Insert, Right Hand Cutting, 1-1/4 in, 90 deg Lead Angle, 1/2 in Maximum Depth of Cut, Through Coolant (Yes/No): Yes

Part #

ISC3101605

MFG Part #

3101605

Standard Pack

1
Iscar 3110003 End Mill, SDMT 3 Insert, 0.472 in Cutting Dia, 0.22 in Maximum Depth of Cut, Carbide Tipped
Iscar
Iscar 3110003 End Mill, SDMT 3 Insert, 0.472 in Cutting Dia, 0.22 in Maximum Depth of Cut, Carbide Tipped

Part #

4001950

MFG Part #

3110003

Standard Pack

1
SUMITOMO 145395 Milling Cutter, 3/4 in Cutting Dia, Weldon Shank, 3 Piece
Sumitomo Electric Industries
SUMITOMO 145395 Milling Cutter, 3/4 in Cutting Dia, Weldon Shank, 3 Piece

Part #

145395

MFG Part #

145395
Harvey Tool 4038112 Indexable Ball Nose End Mill, 0.031 in Diameter Cutting
Harvey Performance Company
Harvey Tool 4038112 Indexable Ball Nose End Mill, 0.031 in Diameter Cutting

Part #

HAR38731-C6

MFG Part #

4038112
Iscar 3106379 Face Mill, 2-1/4 in Overall Length
Iscar
Iscar 3106379 Face Mill, 2-1/4 in Overall Length

Part #

ISC3106379

MFG Part #

3106379
Sandvik Coromant 5739741 Face Milling Cutter, 3 in Cutting Dia, 1 in Shank Dia, 1.9685 in Overall Length, RA245.Rxx Insert, 0.3937 in Maximum Depth of Cut, 1 in Arbor Hole Diameter, 45 deg Lead Angle, Through Coolant (Yes/No): No
Sandvik Coromant
Sandvik Coromant 5739741 Face Milling Cutter, 3 in Cutting Dia, 1 in Shank Dia, 1.9685 in Overall Length, RA245.Rxx Insert, 0.3937 in Maximum Depth of Cut, 1 in Arbor Hole Diameter, 45 deg Lead Angle, Through Coolant (Yes/No): No

Part #

SAN5739741

MFG Part #

5739741
ÿÿ
KYOCERA Precision Tools
KYOCERA KYOCERA MEW1000W100103T End Mill, Weldon Flat Shank

Part #

KYO8606155

MFG Part #

MEW1000W100103T
Indexable Face Mill, 2-1/2 in Cutting Dia, 3/4 in Shank Dia, SEKN 42 Insert
Approved Vendor
Indexable Face Mill, 2-1/2 in Cutting Dia, 3/4 in Shank Dia, SEKN 42 Insert

Part #

/ME1480250

MFG Part #

1480250
Iscar 3105589 Face Mill, 3.38 in Overall Length
Iscar
Iscar 3105589 Face Mill, 3.38 in Overall Length

Part #

ISC3105589

MFG Part #

3105589

Standard Pack

1
MOLDINO KIT-ITR4D4032B-5-4 Shell Mill, 2 in Cutting Dia, 2 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter
MOLDINO
MOLDINO KIT-ITR4D4032B-5-4 Shell Mill, 2 in Cutting Dia, 2 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter

Part #

MITSKIT-ITR4D4032B-5-4

MFG Part #

KIT-ITR4D4032B-5-4

Standard Pack

1
Sandvik Coromant 8029445 Face Mill, 0.2933 in Diameter Cutting, 3.937 in Overall Length, 0.1654 in (APMXEFW), 0.0315 in (APMXFFW) Maximum Depth of Cut, 5/8 in Shank Length, Yes Through Coolant
Sandvik Coromant
Sandvik Coromant 8029445 Face Mill, 0.2933 in Diameter Cutting, 3.937 in Overall Length, 0.1654 in (APMXEFW), 0.0315 in (APMXFFW) Maximum Depth of Cut, 5/8 in Shank Length, Yes Through Coolant

Part #

SAN8029445

MFG Part #

8029445
ÿ
K-TOOL, INCORPORATED
K-TOOL SA3000 Super Alloy Mill, 3 in Cutting Dia

Part #

STIP29-03-SA3000

MFG Part #

SA3000
Sandvik Coromant 7295477 Disc Milling Cutter, 4 in Cutting Dia, 0.591-0.689 in Cutting Width, Right Hand Cutting, 1 in Hole Dia, 1 in, 1 in Arbor Hole Diameter, 1.024 in Maximum Depth of Cut, R331.32C
Sandvik Coromant
Sandvik Coromant 7295477 Disc Milling Cutter, 4 in Cutting Dia, 0.591-0.689 in Cutting Width, Right Hand Cutting, 1 in Hole Dia, 1 in, 1 in Arbor Hole Diameter, 1.024 in Maximum Depth of Cut, R331.32C

Part #

STIP14-03-7295477

MFG Part #

7295477
OSG HY-PRO® VG441-1010-BN Ball Nose End Mill, 1-1/4 in Cutting Dia, Right Hand Cutting, Solid Carbide Tipped
OSG
OSG HY-PRO® VG441-1010-BN Ball Nose End Mill, 1-1/4 in Cutting Dia, Right Hand Cutting, Solid Carbide Tipped

Part #

OSGVG4411010BN

MFG Part #

VG441-1010-BN
Sandvik Coromant 5739315 Shoulder Milling Cutter, Weldon Shank, RA390.MXX Insert, 90 deg Lead Angle, 0.394 in Maximum Depth of Cut
Sandvik Coromant
Sandvik Coromant 5739315 Shoulder Milling Cutter, Weldon Shank, RA390.MXX Insert, 90 deg Lead Angle, 0.394 in Maximum Depth of Cut

Part #

STIP14-07-08219

MFG Part #

5739315
ÿÿÿÿ
OSG
OSG HY-PRO® CARB VGx VG441-7509 End Mill, 3/4 in Cutting Dia, Shrink Fit Shank, Center Cutting, 2-1/4 in Maximum Depth of Cut

Part #

STIP43-01-VG4417509

MFG Part #

VG441-7509
HTC HTC1454312 Ball Nose End Mill, 5/16 in Cutting Dia, Solid Carbide Tipped
HTC Tool-Cutter Manufacturing
HTC HTC1454312 Ball Nose End Mill, 5/16 in Cutting Dia, Solid Carbide Tipped

Part #

/HTC1454312

MFG Part #

HTC1454312
Sandvik Coromant 5722871 Shoulder Milling Cutter, 1 in Cutting Dia, Straight Shank, A490.OXX Insert, Right Hand Cutting, 90 deg Lead Angle, 0.2165 in Maximum Depth of Cut, Through Coolant (Yes/No): Yes
Sandvik Coromant
Sandvik Coromant 5722871 Shoulder Milling Cutter, 1 in Cutting Dia, Straight Shank, A490.OXX Insert, Right Hand Cutting, 90 deg Lead Angle, 0.2165 in Maximum Depth of Cut, Through Coolant (Yes/No): Yes

Part #

SAN5722871

MFG Part #

5722871
Ball Nose End Mill, 1/8 in Cutting Dia, 1/2 in Maximum Depth of Cut, Carbide Tipped
Approved Vendor
Ball Nose End Mill, 1/8 in Cutting Dia, 1/2 in Maximum Depth of Cut, Carbide Tipped

Part #

DD602008B

ÿ
Dormer Pramet
Pramet 7276932 ECON ISTN10 Indexable Shoulder Mill, 3/4 in Dia Cutting, Cylindrical Shank, TNGX Insert, Right Hand Cutting, 90 deg Lead Angle

Part #

DOR7276932

MFG Part #

7276932
Mitsubishi Materials USA IASPVS2016R-4 Indexable Square-Shoulder End Mill, 1 in Cutting Dia, 3 in Maximum Depth of Cut
Mitsubishi Materials USA Corp
Mitsubishi Materials USA IASPVS2016R-4 Indexable Square-Shoulder End Mill, 1 in Cutting Dia, 3 in Maximum Depth of Cut

Part #

HITIASPVS2016R-4

MFG Part #

IASPVS2016R-4

Standard Pack

1
Sandvik Coromant 6657445 Grooving and Part-Off Cutter, 3.1496 in Cutting Dia, 0.1181 in Cutting Width, Right Hand Cutting, QD.X.C Insert, 0.394 in Hole Dia, X10, 0.394 in Arbor Hole Diameter, 0.945 in Maximum Depth of Cut, QD.X.C
Sandvik Coromant
Sandvik Coromant 6657445 Grooving and Part-Off Cutter, 3.1496 in Cutting Dia, 0.1181 in Cutting Width, Right Hand Cutting, QD.X.C Insert, 0.394 in Hole Dia, X10, 0.394 in Arbor Hole Diameter, 0.945 in Maximum Depth of Cut, QD.X.C

Part #

STIP14-03-6657445

MFG Part #

6657445
Iscar 5606110 Face Mill, LNMT Insert
Iscar
Iscar 5606110 Face Mill, LNMT Insert

Part #

ISC5606110

MFG Part #

5606110

Standard Pack

1
Ball Nose End Mill, 1/8 in Cutting Dia, 3 in Overall Length, 1/8 in Shank Dia, P38 Lightning
Approved Vendor
Ball Nose End Mill, 1/8 in Cutting Dia, 3 in Overall Length, 1/8 in Shank Dia, P38 Lightning

Part #

P38-005146

MFG Part #

P38-005146
Iscar 3101605 Indexable End Mill, 1-1/4 in Cutting Dia, Flat, Weldon Shank, 3M AXKT 1304/2006 Insert, Right Hand Cutting, 1-1/4 in, 90 deg Lead Angle, 1/2 in Maximum Depth of Cut, Through Coolant (Yes/No): Yes
Iscar
Iscar 3101605 Indexable End Mill, 1-1/4 in Cutting Dia, Flat, Weldon Shank, 3M AXKT 1304/2006 Insert, Right Hand Cutting, 1-1/4 in, 90 deg Lead Angle, 1/2 in Maximum Depth of Cut, Through Coolant (Yes/No): Yes

Part #

ISC3101605

MFG Part #

3101605

Standard Pack

1
Iscar 3110003 End Mill, SDMT 3 Insert, 0.472 in Cutting Dia, 0.22 in Maximum Depth of Cut, Carbide Tipped
Iscar
Iscar 3110003 End Mill, SDMT 3 Insert, 0.472 in Cutting Dia, 0.22 in Maximum Depth of Cut, Carbide Tipped

Part #

4001950

MFG Part #

3110003

Standard Pack

1
SUMITOMO 145395 Milling Cutter, 3/4 in Cutting Dia, Weldon Shank, 3 Piece
Sumitomo Electric Industries
SUMITOMO 145395 Milling Cutter, 3/4 in Cutting Dia, Weldon Shank, 3 Piece

Part #

145395

MFG Part #

145395
Harvey Tool 4038112 Indexable Ball Nose End Mill, 0.031 in Diameter Cutting
Harvey Performance Company
Harvey Tool 4038112 Indexable Ball Nose End Mill, 0.031 in Diameter Cutting

Part #

HAR38731-C6

MFG Part #

4038112
Iscar 3106379 Face Mill, 2-1/4 in Overall Length
Iscar
Iscar 3106379 Face Mill, 2-1/4 in Overall Length

Part #

ISC3106379

MFG Part #

3106379
Sandvik Coromant 5739741 Face Milling Cutter, 3 in Cutting Dia, 1 in Shank Dia, 1.9685 in Overall Length, RA245.Rxx Insert, 0.3937 in Maximum Depth of Cut, 1 in Arbor Hole Diameter, 45 deg Lead Angle, Through Coolant (Yes/No): No
Sandvik Coromant
Sandvik Coromant 5739741 Face Milling Cutter, 3 in Cutting Dia, 1 in Shank Dia, 1.9685 in Overall Length, RA245.Rxx Insert, 0.3937 in Maximum Depth of Cut, 1 in Arbor Hole Diameter, 45 deg Lead Angle, Through Coolant (Yes/No): No

Part #

SAN5739741

MFG Part #

5739741
ÿÿ
KYOCERA Precision Tools
KYOCERA KYOCERA MEW1000W100103T End Mill, Weldon Flat Shank

Part #

KYO8606155

MFG Part #

MEW1000W100103T
Indexable Face Mill, 2-1/2 in Cutting Dia, 3/4 in Shank Dia, SEKN 42 Insert
Approved Vendor
Indexable Face Mill, 2-1/2 in Cutting Dia, 3/4 in Shank Dia, SEKN 42 Insert

Part #

/ME1480250

MFG Part #

1480250
Iscar 3105589 Face Mill, 3.38 in Overall Length
Iscar
Iscar 3105589 Face Mill, 3.38 in Overall Length

Part #

ISC3105589

MFG Part #

3105589

Standard Pack

1
MOLDINO KIT-ITR4D4032B-5-4 Shell Mill, 2 in Cutting Dia, 2 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter
MOLDINO
MOLDINO KIT-ITR4D4032B-5-4 Shell Mill, 2 in Cutting Dia, 2 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter

Part #

MITSKIT-ITR4D4032B-5-4

MFG Part #

KIT-ITR4D4032B-5-4

Standard Pack

1
Sandvik Coromant 8029445 Face Mill, 0.2933 in Diameter Cutting, 3.937 in Overall Length, 0.1654 in (APMXEFW), 0.0315 in (APMXFFW) Maximum Depth of Cut, 5/8 in Shank Length, Yes Through Coolant
Sandvik Coromant
Sandvik Coromant 8029445 Face Mill, 0.2933 in Diameter Cutting, 3.937 in Overall Length, 0.1654 in (APMXEFW), 0.0315 in (APMXFFW) Maximum Depth of Cut, 5/8 in Shank Length, Yes Through Coolant

Part #

SAN8029445

MFG Part #

8029445
ÿ
K-TOOL, INCORPORATED
K-TOOL SA3000 Super Alloy Mill, 3 in Cutting Dia

Part #

STIP29-03-SA3000

MFG Part #

SA3000
Sandvik Coromant 7295477 Disc Milling Cutter, 4 in Cutting Dia, 0.591-0.689 in Cutting Width, Right Hand Cutting, 1 in Hole Dia, 1 in, 1 in Arbor Hole Diameter, 1.024 in Maximum Depth of Cut, R331.32C
Sandvik Coromant
Sandvik Coromant 7295477 Disc Milling Cutter, 4 in Cutting Dia, 0.591-0.689 in Cutting Width, Right Hand Cutting, 1 in Hole Dia, 1 in, 1 in Arbor Hole Diameter, 1.024 in Maximum Depth of Cut, R331.32C

Part #

STIP14-03-7295477

MFG Part #

7295477
OSG HY-PRO® VG441-1010-BN Ball Nose End Mill, 1-1/4 in Cutting Dia, Right Hand Cutting, Solid Carbide Tipped
OSG
OSG HY-PRO® VG441-1010-BN Ball Nose End Mill, 1-1/4 in Cutting Dia, Right Hand Cutting, Solid Carbide Tipped

Part #

OSGVG4411010BN

MFG Part #

VG441-1010-BN
Sandvik Coromant 5739315 Shoulder Milling Cutter, Weldon Shank, RA390.MXX Insert, 90 deg Lead Angle, 0.394 in Maximum Depth of Cut
Sandvik Coromant
Sandvik Coromant 5739315 Shoulder Milling Cutter, Weldon Shank, RA390.MXX Insert, 90 deg Lead Angle, 0.394 in Maximum Depth of Cut

Part #

STIP14-07-08219

MFG Part #

5739315
ÿÿÿÿ
OSG
OSG HY-PRO® CARB VGx VG441-7509 End Mill, 3/4 in Cutting Dia, Shrink Fit Shank, Center Cutting, 2-1/4 in Maximum Depth of Cut

Part #

STIP43-01-VG4417509

MFG Part #

VG441-7509
HTC HTC1454312 Ball Nose End Mill, 5/16 in Cutting Dia, Solid Carbide Tipped
HTC Tool-Cutter Manufacturing
HTC HTC1454312 Ball Nose End Mill, 5/16 in Cutting Dia, Solid Carbide Tipped

Part #

/HTC1454312

MFG Part #

HTC1454312
Sandvik Coromant 5722871 Shoulder Milling Cutter, 1 in Cutting Dia, Straight Shank, A490.OXX Insert, Right Hand Cutting, 90 deg Lead Angle, 0.2165 in Maximum Depth of Cut, Through Coolant (Yes/No): Yes
Sandvik Coromant
Sandvik Coromant 5722871 Shoulder Milling Cutter, 1 in Cutting Dia, Straight Shank, A490.OXX Insert, Right Hand Cutting, 90 deg Lead Angle, 0.2165 in Maximum Depth of Cut, Through Coolant (Yes/No): Yes

Part #

SAN5722871

MFG Part #

5722871
Ball Nose End Mill, 1/8 in Cutting Dia, 1/2 in Maximum Depth of Cut, Carbide Tipped
Approved Vendor
Ball Nose End Mill, 1/8 in Cutting Dia, 1/2 in Maximum Depth of Cut, Carbide Tipped

Part #

DD602008B

ÿ
Dormer Pramet
Pramet 7276932 ECON ISTN10 Indexable Shoulder Mill, 3/4 in Dia Cutting, Cylindrical Shank, TNGX Insert, Right Hand Cutting, 90 deg Lead Angle

Part #

DOR7276932

MFG Part #

7276932
Mitsubishi Materials USA IASPVS2016R-4 Indexable Square-Shoulder End Mill, 1 in Cutting Dia, 3 in Maximum Depth of Cut
Mitsubishi Materials USA Corp
Mitsubishi Materials USA IASPVS2016R-4 Indexable Square-Shoulder End Mill, 1 in Cutting Dia, 3 in Maximum Depth of Cut

Part #

HITIASPVS2016R-4

MFG Part #

IASPVS2016R-4

Standard Pack

1
Sandvik Coromant 6657445 Grooving and Part-Off Cutter, 3.1496 in Cutting Dia, 0.1181 in Cutting Width, Right Hand Cutting, QD.X.C Insert, 0.394 in Hole Dia, X10, 0.394 in Arbor Hole Diameter, 0.945 in Maximum Depth of Cut, QD.X.C
Sandvik Coromant
Sandvik Coromant 6657445 Grooving and Part-Off Cutter, 3.1496 in Cutting Dia, 0.1181 in Cutting Width, Right Hand Cutting, QD.X.C Insert, 0.394 in Hole Dia, X10, 0.394 in Arbor Hole Diameter, 0.945 in Maximum Depth of Cut, QD.X.C

Part #

STIP14-03-6657445

MFG Part #

6657445
Iscar 5606110 Face Mill, LNMT Insert
Iscar
Iscar 5606110 Face Mill, LNMT Insert

Part #

ISC5606110

MFG Part #

5606110

Standard Pack

1