Filter

Milling Holders & Adapters

Showing 141 items

content loaded
Sandvik Coromant 6074001 Milling Adapter, 1-1/4 in Hole Dia, CAT-V Shank, CAT V40 Taper, 1-1/4 in Nose Dia, 2.3622 in Projection
Sandvik Coromant
Sandvik Coromant 6074001 Milling Adapter, 1-1/4 in Hole Dia, CAT-V Shank, CAT V40 Taper, 1-1/4 in Nose Dia, 2.3622 in Projection

Part #

SAN6074001

MFG Part #

6074001
TECHNIKS 32954 End Mill Holder, 1/2 in Hole Dia, Taper Shank, HSK63A Taper, 1.38 in Nose Dia, 76 mm Projection
TECHNIKS INDUSTRIES
TECHNIKS 32954 End Mill Holder, 1/2 in Hole Dia, Taper Shank, HSK63A Taper, 1.38 in Nose Dia, 76 mm Projection

Part #

STIP29-03-32954

MFG Part #

32954
Sandvik Coromant 6078825 Milling Adapter, 3/4 in Diameter Hole, Arbor Shank, CAT-V40 Taper, 3/4 in Diameter Nose, 1.5748 in Projection
Sandvik Coromant
Sandvik Coromant 6078825 Milling Adapter, 3/4 in Diameter Hole, Arbor Shank, CAT-V40 Taper, 3/4 in Diameter Nose, 1.5748 in Projection

Part #

SAN6078825

MFG Part #

6078825
TECHNIKS 22947-6 Extended Length Precision Single End End Mill Holder With Coolant Through Channel, 1-1/4 in Dia Hole, Tapered Shank, CAT50 Taper, 2-1/2 in Dia Nose, 6 in Projection
TECHNIKS INDUSTRIES
TECHNIKS 22947-6 Extended Length Precision Single End End Mill Holder With Coolant Through Channel, 1-1/4 in Dia Hole, Tapered Shank, CAT50 Taper, 2-1/2 in Dia Nose, 6 in Projection

Part #

TEC22947-6

MFG Part #

22947-6
Sandvik Coromant 5721252 Milling Adapter, 1-1/2 in Hole Dia, CAT-V Shank, CAT 50 Taper, 1-1/2 in Nose Dia, 4 in Projection
Sandvik Coromant
Sandvik Coromant 5721252 Milling Adapter, 1-1/2 in Hole Dia, CAT-V Shank, CAT 50 Taper, 1-1/2 in Nose Dia, 4 in Projection

Part #

STIP14-03-5721252

MFG Part #

5721252
TECHNIKS 22949 End Mill Holder, 1-1/2 in Hole Dia, Taper Shank, CAT 50 Taper, 2-1/2 in Nose Dia, 4.6 in Projection
TECHNIKS INDUSTRIES
TECHNIKS 22949 End Mill Holder, 1-1/2 in Hole Dia, Taper Shank, CAT 50 Taper, 2-1/2 in Nose Dia, 4.6 in Projection

Part #

TEK22949

MFG Part #

22949

Standard Pack

1
End Mill Adapter, 3/8 in Hole Dia, CAT50 Taper
Approved Vendor
End Mill Adapter, 3/8 in Hole Dia, CAT50 Taper

Part #

/GM30V50E038250

Standard Pack

1
PARLEC C50-15SM6 Shell Mill Holder, Machining Taper Shank, CV50 Taper, 3-3/4 in Nose Dia, 6 in Projection
PARLEC
PARLEC C50-15SM6 Shell Mill Holder, Machining Taper Shank, CV50 Taper, 3-3/4 in Nose Dia, 6 in Projection

Part #

/C50-15SM6

MFG Part #

C50-15SM6
Milling Holder Set, 3/16 - 1-1/4 in Hole Dia
Approved Vendor
Milling Holder Set, 3/16 - 1-1/4 in Hole Dia

Part #

STIP33-33-GN50RB8

Vargus 80646 Tool Holder, 0.34 in Hole Dia
Vargus
Vargus 80646 Tool Holder, 0.34 in Hole Dia

Part #

VNE80646

MFG Part #

80646
TECHNIKS 22937 End Mill Holder, 1/2 in Hole Dia, Taper Shank, CAT 50 Taper, 1-1/4 in Nose Dia, 4 in Projection
TECHNIKS INDUSTRIES
TECHNIKS 22937 End Mill Holder, 1/2 in Hole Dia, Taper Shank, CAT 50 Taper, 1-1/4 in Nose Dia, 4 in Projection

Part #

STIP45-03-22937

MFG Part #

22937
End Mill Holder, 3/4 in Hole Dia, R8 Taper
Approved Vendor
End Mill Holder, 3/4 in Hole Dia, R8 Taper

Part #

STIP33-33-GN51R8S34

Sandvik Coromant 7549817 Milling Adapter, 3/4 in Hole Dia, Arbor Shank, C5 Taper, 3/4 in Nose Dia, 2.756 in Projection
Sandvik Coromant
Sandvik Coromant 7549817 Milling Adapter, 3/4 in Hole Dia, Arbor Shank, C5 Taper, 3/4 in Nose Dia, 2.756 in Projection

Part #

SAN7549817

MFG Part #

7549817
Milling Adapter, 1/4 in Hole Dia, Taper Shank, CAT 40 Taper, 0.78 in Nose Dia, 2-1/2 in Projection
Approved Vendor
Milling Adapter, 1/4 in Hole Dia, Taper Shank, CAT 40 Taper, 0.78 in Nose Dia, 2-1/2 in Projection

Part #

HPICAT40EM0250250

MFG Part #

CAT40-EM025-0250

Standard Pack

1
Rapidhold TS1127103 End Mill Holder, 1.12 in Projection
RAPIDHOLD
Rapidhold TS1127103 End Mill Holder, 1.12 in Projection

Part #

STIP33-33-TS1127103

End Mill Holder, 1-1/2 in Hole Dia, R8 Taper
Approved Vendor
End Mill Holder, 1-1/2 in Hole Dia, R8 Taper

Part #

STIP33-33-GN51R8S112

PARLEC H100-25SM2 Shell Mill Holder, 2-1/2 in Dia Hole, HSK100A Taper, 2-7/8 in Projection
TECHNIKS INDUSTRIES
PARLEC H100-25SM2 Shell Mill Holder, 2-1/2 in Dia Hole, HSK100A Taper, 2-7/8 in Projection

Part #

PARH100-25SM2

MFG Part #

H100-25SM2
TECHNIKS 22911-2.5B End Mill Holder, 1/4 in Hole Dia, Taper Shank, CAT 40 Taper, 0.78 in Nose Dia, 2-1/2 in Projection
TECHNIKS INDUSTRIES
TECHNIKS 22911-2.5B End Mill Holder, 1/4 in Hole Dia, Taper Shank, CAT 40 Taper, 0.78 in Nose Dia, 2-1/2 in Projection

Part #

TEK22911-2.5B

MFG Part #

22911-2.5B

Standard Pack

1
Sandvik Coromant 6078869 Milling Adapter, 1 in Diameter Hole, Weldon Shank, C8 Taper, 1.9055 in Diameter Nose, 3.1496 in Projection
Sandvik Coromant
Sandvik Coromant 6078869 Milling Adapter, 1 in Diameter Hole, Weldon Shank, C8 Taper, 1.9055 in Diameter Nose, 3.1496 in Projection

Part #

SAN6078869

MFG Part #

6078869
Sandvik Coromant 6073993 Milling Adapter, 0.8661 in Diameter Hole, Arbor Shank, CAT-V40 Taper, 0.8661 in Diameter Nose, 1.3779 in Projection
Sandvik Coromant
Sandvik Coromant 6073993 Milling Adapter, 0.8661 in Diameter Hole, Arbor Shank, CAT-V40 Taper, 0.8661 in Diameter Nose, 1.3779 in Projection

Part #

SAN6073993

MFG Part #

6073993
TECHNIKS 22920 End Mill Holder, 5/8 in Hole Dia, 1-1/2 in Nose Dia
TECHNIKS INDUSTRIES
TECHNIKS 22920 End Mill Holder, 5/8 in Hole Dia, 1-1/2 in Nose Dia

Part #

22920

MFG Part #

22920
TECHNIKS 22941-6 Extended Length Precision Single End End Mill Holder With Coolant Through Channel, 3/4 in Dia Hole, Tapered Shank, CAT50 Taper, 1-3/4 in Dia Nose, 6 in Projection
TECHNIKS INDUSTRIES
TECHNIKS 22941-6 Extended Length Precision Single End End Mill Holder With Coolant Through Channel, 3/4 in Dia Hole, Tapered Shank, CAT50 Taper, 1-3/4 in Dia Nose, 6 in Projection

Part #

TEK22941-6

MFG Part #

22941-6
Sandvik Coromant 6408405 Milling Adapter, 5/8 in Diameter Hole, Weldon Shank, C8 Taper, 1.2756 in Diameter Nose, 2.7559 in Projection
Sandvik Coromant
Sandvik Coromant 6408405 Milling Adapter, 5/8 in Diameter Hole, Weldon Shank, C8 Taper, 1.2756 in Diameter Nose, 2.7559 in Projection

Part #

SAN6408405

MFG Part #

6408405
TECHNIKS 22917-2.5B End Mill Holder, 1/2 in Hole Dia, Taper Shank, CAT 40 Taper, 1-1/4 in Nose Dia, 2-1/2 in Projection
TECHNIKS INDUSTRIES
TECHNIKS 22917-2.5B End Mill Holder, 1/2 in Hole Dia, Taper Shank, CAT 40 Taper, 1-1/4 in Nose Dia, 2-1/2 in Projection

Part #

TEK22917-2.5B

MFG Part #

22917-2.5B

Standard Pack

1
Sandvik Coromant 6074001 Milling Adapter, 1-1/4 in Hole Dia, CAT-V Shank, CAT V40 Taper, 1-1/4 in Nose Dia, 2.3622 in Projection
Sandvik Coromant
Sandvik Coromant 6074001 Milling Adapter, 1-1/4 in Hole Dia, CAT-V Shank, CAT V40 Taper, 1-1/4 in Nose Dia, 2.3622 in Projection

Part #

SAN6074001

MFG Part #

6074001
TECHNIKS 32954 End Mill Holder, 1/2 in Hole Dia, Taper Shank, HSK63A Taper, 1.38 in Nose Dia, 76 mm Projection
TECHNIKS INDUSTRIES
TECHNIKS 32954 End Mill Holder, 1/2 in Hole Dia, Taper Shank, HSK63A Taper, 1.38 in Nose Dia, 76 mm Projection

Part #

STIP29-03-32954

MFG Part #

32954
Sandvik Coromant 6078825 Milling Adapter, 3/4 in Diameter Hole, Arbor Shank, CAT-V40 Taper, 3/4 in Diameter Nose, 1.5748 in Projection
Sandvik Coromant
Sandvik Coromant 6078825 Milling Adapter, 3/4 in Diameter Hole, Arbor Shank, CAT-V40 Taper, 3/4 in Diameter Nose, 1.5748 in Projection

Part #

SAN6078825

MFG Part #

6078825
TECHNIKS 22947-6 Extended Length Precision Single End End Mill Holder With Coolant Through Channel, 1-1/4 in Dia Hole, Tapered Shank, CAT50 Taper, 2-1/2 in Dia Nose, 6 in Projection
TECHNIKS INDUSTRIES
TECHNIKS 22947-6 Extended Length Precision Single End End Mill Holder With Coolant Through Channel, 1-1/4 in Dia Hole, Tapered Shank, CAT50 Taper, 2-1/2 in Dia Nose, 6 in Projection

Part #

TEC22947-6

MFG Part #

22947-6
Sandvik Coromant 5721252 Milling Adapter, 1-1/2 in Hole Dia, CAT-V Shank, CAT 50 Taper, 1-1/2 in Nose Dia, 4 in Projection
Sandvik Coromant
Sandvik Coromant 5721252 Milling Adapter, 1-1/2 in Hole Dia, CAT-V Shank, CAT 50 Taper, 1-1/2 in Nose Dia, 4 in Projection

Part #

STIP14-03-5721252

MFG Part #

5721252
TECHNIKS 22949 End Mill Holder, 1-1/2 in Hole Dia, Taper Shank, CAT 50 Taper, 2-1/2 in Nose Dia, 4.6 in Projection
TECHNIKS INDUSTRIES
TECHNIKS 22949 End Mill Holder, 1-1/2 in Hole Dia, Taper Shank, CAT 50 Taper, 2-1/2 in Nose Dia, 4.6 in Projection

Part #

TEK22949

MFG Part #

22949

Standard Pack

1
End Mill Adapter, 3/8 in Hole Dia, CAT50 Taper
Approved Vendor
End Mill Adapter, 3/8 in Hole Dia, CAT50 Taper

Part #

/GM30V50E038250

Standard Pack

1
PARLEC C50-15SM6 Shell Mill Holder, Machining Taper Shank, CV50 Taper, 3-3/4 in Nose Dia, 6 in Projection
PARLEC
PARLEC C50-15SM6 Shell Mill Holder, Machining Taper Shank, CV50 Taper, 3-3/4 in Nose Dia, 6 in Projection

Part #

/C50-15SM6

MFG Part #

C50-15SM6
Milling Holder Set, 3/16 - 1-1/4 in Hole Dia
Approved Vendor
Milling Holder Set, 3/16 - 1-1/4 in Hole Dia

Part #

STIP33-33-GN50RB8

Vargus 80646 Tool Holder, 0.34 in Hole Dia
Vargus
Vargus 80646 Tool Holder, 0.34 in Hole Dia

Part #

VNE80646

MFG Part #

80646
TECHNIKS 22937 End Mill Holder, 1/2 in Hole Dia, Taper Shank, CAT 50 Taper, 1-1/4 in Nose Dia, 4 in Projection
TECHNIKS INDUSTRIES
TECHNIKS 22937 End Mill Holder, 1/2 in Hole Dia, Taper Shank, CAT 50 Taper, 1-1/4 in Nose Dia, 4 in Projection

Part #

STIP45-03-22937

MFG Part #

22937
End Mill Holder, 3/4 in Hole Dia, R8 Taper
Approved Vendor
End Mill Holder, 3/4 in Hole Dia, R8 Taper

Part #

STIP33-33-GN51R8S34

Sandvik Coromant 7549817 Milling Adapter, 3/4 in Hole Dia, Arbor Shank, C5 Taper, 3/4 in Nose Dia, 2.756 in Projection
Sandvik Coromant
Sandvik Coromant 7549817 Milling Adapter, 3/4 in Hole Dia, Arbor Shank, C5 Taper, 3/4 in Nose Dia, 2.756 in Projection

Part #

SAN7549817

MFG Part #

7549817
Milling Adapter, 1/4 in Hole Dia, Taper Shank, CAT 40 Taper, 0.78 in Nose Dia, 2-1/2 in Projection
Approved Vendor
Milling Adapter, 1/4 in Hole Dia, Taper Shank, CAT 40 Taper, 0.78 in Nose Dia, 2-1/2 in Projection

Part #

HPICAT40EM0250250

MFG Part #

CAT40-EM025-0250

Standard Pack

1
Rapidhold TS1127103 End Mill Holder, 1.12 in Projection
RAPIDHOLD
Rapidhold TS1127103 End Mill Holder, 1.12 in Projection

Part #

STIP33-33-TS1127103

End Mill Holder, 1-1/2 in Hole Dia, R8 Taper
Approved Vendor
End Mill Holder, 1-1/2 in Hole Dia, R8 Taper

Part #

STIP33-33-GN51R8S112

PARLEC H100-25SM2 Shell Mill Holder, 2-1/2 in Dia Hole, HSK100A Taper, 2-7/8 in Projection
TECHNIKS INDUSTRIES
PARLEC H100-25SM2 Shell Mill Holder, 2-1/2 in Dia Hole, HSK100A Taper, 2-7/8 in Projection

Part #

PARH100-25SM2

MFG Part #

H100-25SM2
TECHNIKS 22911-2.5B End Mill Holder, 1/4 in Hole Dia, Taper Shank, CAT 40 Taper, 0.78 in Nose Dia, 2-1/2 in Projection
TECHNIKS INDUSTRIES
TECHNIKS 22911-2.5B End Mill Holder, 1/4 in Hole Dia, Taper Shank, CAT 40 Taper, 0.78 in Nose Dia, 2-1/2 in Projection

Part #

TEK22911-2.5B

MFG Part #

22911-2.5B

Standard Pack

1
Sandvik Coromant 6078869 Milling Adapter, 1 in Diameter Hole, Weldon Shank, C8 Taper, 1.9055 in Diameter Nose, 3.1496 in Projection
Sandvik Coromant
Sandvik Coromant 6078869 Milling Adapter, 1 in Diameter Hole, Weldon Shank, C8 Taper, 1.9055 in Diameter Nose, 3.1496 in Projection

Part #

SAN6078869

MFG Part #

6078869
Sandvik Coromant 6073993 Milling Adapter, 0.8661 in Diameter Hole, Arbor Shank, CAT-V40 Taper, 0.8661 in Diameter Nose, 1.3779 in Projection
Sandvik Coromant
Sandvik Coromant 6073993 Milling Adapter, 0.8661 in Diameter Hole, Arbor Shank, CAT-V40 Taper, 0.8661 in Diameter Nose, 1.3779 in Projection

Part #

SAN6073993

MFG Part #

6073993
TECHNIKS 22920 End Mill Holder, 5/8 in Hole Dia, 1-1/2 in Nose Dia
TECHNIKS INDUSTRIES
TECHNIKS 22920 End Mill Holder, 5/8 in Hole Dia, 1-1/2 in Nose Dia

Part #

22920

MFG Part #

22920
TECHNIKS 22941-6 Extended Length Precision Single End End Mill Holder With Coolant Through Channel, 3/4 in Dia Hole, Tapered Shank, CAT50 Taper, 1-3/4 in Dia Nose, 6 in Projection
TECHNIKS INDUSTRIES
TECHNIKS 22941-6 Extended Length Precision Single End End Mill Holder With Coolant Through Channel, 3/4 in Dia Hole, Tapered Shank, CAT50 Taper, 1-3/4 in Dia Nose, 6 in Projection

Part #

TEK22941-6

MFG Part #

22941-6
Sandvik Coromant 6408405 Milling Adapter, 5/8 in Diameter Hole, Weldon Shank, C8 Taper, 1.2756 in Diameter Nose, 2.7559 in Projection
Sandvik Coromant
Sandvik Coromant 6408405 Milling Adapter, 5/8 in Diameter Hole, Weldon Shank, C8 Taper, 1.2756 in Diameter Nose, 2.7559 in Projection

Part #

SAN6408405

MFG Part #

6408405
TECHNIKS 22917-2.5B End Mill Holder, 1/2 in Hole Dia, Taper Shank, CAT 40 Taper, 1-1/4 in Nose Dia, 2-1/2 in Projection
TECHNIKS INDUSTRIES
TECHNIKS 22917-2.5B End Mill Holder, 1/2 in Hole Dia, Taper Shank, CAT 40 Taper, 1-1/4 in Nose Dia, 2-1/2 in Projection

Part #

TEK22917-2.5B

MFG Part #

22917-2.5B

Standard Pack

1