Filter

Powder-Actuated Fasteners

Cable & Conduit Straps

Ceiling Clips

Collated Nails

Drive Pins - Bulk

Powder Loads

Threaded Studs

Showing 69 items

content loaded
Simpson Strong-Tie® P25SL3 10-Shot Strip Powder Load, 0.25 Caliber, Green, 3 Level, For Use With Hilti® DX35 Power Actuated Tool and R355 Tools
Simpson Strong-Tie
Simpson Strong-Tie® P25SL3 10-Shot Strip Powder Load, 0.25 Caliber, Green, 3 Level, For Use With Hilti® DX35 Power Actuated Tool and R355 Tools

Part #

PLS.25G

MFG Part #

P25SL3

Standard Pack

10M
SENCO® GE21APAX Collated Nail, Paper Tape, Bright Basic
SENCO
SENCO® GE21APAX Collated Nail, Paper Tape, Bright Basic

Part #

GE21APAX

MFG Part #

GE21APAX
Simpson Strong-Tie® PCLDP-125 Ceiling Clip With 1-1/4 in Pin, 0.145 in Dia, 0.3 in Head
Simpson Strong-Tie
Simpson Strong-Tie® PCLDP-125 Ceiling Clip With 1-1/4 in Pin, 0.145 in Dia, 0.3 in Head

Part #

PCC125

MFG Part #

PCLDP-125

Standard Pack

100
Simpson Strong-Tie® PDPW-200 Low Velocity Drive Pin With Metal Washer, 0.145 in Dia x 2 in L Shank, 0.3 in Head
Simpson Strong-Tie
Simpson Strong-Tie® PDPW-200 Low Velocity Drive Pin With Metal Washer, 0.145 in Dia x 2 in L Shank, 0.3 in Head

Part #

PW3200

MFG Part #

PDPW-200

Standard Pack

1000
ÿ
Powers Fasteners
Dewalt® Powers® 50576 Strip Powder Load, 0.25 Cal Caliber, Yellow

Part #

50576

MFG Part #

50576
Simpson Strong-Tie® PDPW-300 Low Velocity Drive Pin With Metal Washer, 0.145 in Dia x 3 in L Shank, 0.3 in Head
Simpson Strong-Tie
Simpson Strong-Tie® PDPW-300 Low Velocity Drive Pin With Metal Washer, 0.145 in Dia x 3 in L Shank, 0.3 in Head

Part #

PW3300

MFG Part #

PDPW-300

Standard Pack

1000
MFTSS030C0040 Threaded Stud, M35x40
Approved Vendor
MFTSS030C0040 Threaded Stud, M35x40

Part #

MFTSS030C0040

MFG Part #

MFTSS030C0040
ÿ
Approved Vendor
PEM® FH-M8X20 Threaded Stud, M8 x 1.25 mm Thread, 20 mm Thread Length

Part #

BFH-M8X20

MFG Part #

FH-M8X20
Dewalt® Powers® 50606 Strip Powder Load, 0.27 Cal Caliber, Purple
Powers Fasteners
Dewalt® Powers® 50606 Strip Powder Load, 0.27 Cal Caliber, Purple

Part #

50606

MFG Part #

50606
ÿ
Powers Fasteners
Dewalt® Powers® 50622 Strip Powder Load, 0.27 Cal Caliber, Green

Part #

50622

MFG Part #

50622
SFH000M412C Flush Head Stud, M4-0.7, 12 mm Thread Length
Approved Vendor
SFH000M412C Flush Head Stud, M4-0.7, 12 mm Thread Length

Part #

SFH000M412C

MFG Part #

SFH000M412C
Dewalt® Powers® 50566 Single Powder Load, 0.25 Cal Caliber, Purple
Powers Fasteners
Dewalt® Powers® 50566 Single Powder Load, 0.25 Cal Caliber, Purple

Part #

50566

MFG Part #

50566
TE-CO® SG5040772 Clamping Stud, 1/2-13 Thread, 1-1/2 in Thread Length
TE-CO Manufacturing
TE-CO® SG5040772 Clamping Stud, 1/2-13 Thread, 1-1/2 in Thread Length

Part #

SG5040772

MFG Part #

SG5040772
MFTSS030C0075 Threaded Stud, M35x75
Approved Vendor
MFTSS030C0075 Threaded Stud, M35x75

Part #

MFTSS030C0075

MFG Part #

MFTSS030C0075
Simpson Strong-Tie® P25SL4 10-Shot Strip Powder Load, 0.25 Caliber, Yellow, 4 Level, For Use With Hilti® DX35 Power Actuated Tool and R355 Tools
Simpson Strong-Tie
Simpson Strong-Tie® P25SL4 10-Shot Strip Powder Load, 0.25 Caliber, Yellow, 4 Level, For Use With Hilti® DX35 Power Actuated Tool and R355 Tools

Part #

PLS.25Y

MFG Part #

P25SL4

Standard Pack

100
Simpson Strong-Tie® PDPT-75 Low Velocity Drive Pin, 0.145 in Dia x 3/4 in L Shank, 0.3 in Head
Simpson Strong-Tie
Simpson Strong-Tie® PDPT-75 Low Velocity Drive Pin, 0.145 in Dia x 3/4 in L Shank, 0.3 in Head

Part #

PT3075

MFG Part #

PDPT-75

Standard Pack

100
Drop-In T-Slot Stud Assembly, M8 x 30, 30 mm Thread Length
Approved Vendor
Drop-In T-Slot Stud Assembly, M8 x 30, 30 mm Thread Length

Part #

/13173

MFG Part #

13173
Simpson Strong-Tie® P27SL3 10-Shot Strip Powder Load, 0.27 Caliber, Green, 3 Level, For Use With P-36B, A-40B, A-41B, Cobra and Most 0.27 Caliber Clone Tools
Simpson Strong-Tie
Simpson Strong-Tie® P27SL3 10-Shot Strip Powder Load, 0.27 Caliber, Green, 3 Level, For Use With P-36B, A-40B, A-41B, Cobra and Most 0.27 Caliber Clone Tools

Part #

PLS.27G

MFG Part #

P27SL3

Standard Pack

100
ÿ
Simpson Strong-Tie
Simpson Strong-Tie® GDP-100KT Drive Pin With Fuel Cell, 0.106 in Dia x 1 in L Shank, 0.24 in Head

Part #

GP100

MFG Part #

GDP-100KT

Standard Pack

5
T-Stud, M8x25
Approved Vendor
T-Stud, M8x25

Part #

13171

MFG Part #

G0815059
Simpson Strong-Tie® P25SL5 10-Shot Strip Powder Load, 0.25 Caliber, Red, 5 Level, For Use With Hilti® DX35 Power Actuated Tool and R355 Tools
Simpson Strong-Tie
Simpson Strong-Tie® P25SL5 10-Shot Strip Powder Load, 0.25 Caliber, Red, 5 Level, For Use With Hilti® DX35 Power Actuated Tool and R355 Tools

Part #

PLS.25R

MFG Part #

P25SL5

Standard Pack

10M
Simpson Strong-Tie® PDP-150 Low Velocity Drive Pin, 0.145 in Dia x 1-1/2 in L Shank, 0.3 in Head
Simpson Strong-Tie
Simpson Strong-Tie® PDP-150 Low Velocity Drive Pin, 0.145 in Dia x 1-1/2 in L Shank, 0.3 in Head

Part #

PR3150

MFG Part #

PDP-150

Standard Pack

1000
TE-CO® SG5040706 Clamping Stud, 1/2-13 Thread, 1-1/2 in Thread Length
TE-CO Manufacturing
TE-CO® SG5040706 Clamping Stud, 1/2-13 Thread, 1-1/2 in Thread Length

Part #

SG5040706

MFG Part #

SG5040706
Collar Stud, 1-1/4-8, 12-5/8 in Thread Length
Approved Vendor
Collar Stud, 1-1/4-8, 12-5/8 in Thread Length

Part #

125U1262STDSPECIAL

MFG Part #

125U1262STDSPECIAL
Simpson Strong-Tie® P25SL3 10-Shot Strip Powder Load, 0.25 Caliber, Green, 3 Level, For Use With Hilti® DX35 Power Actuated Tool and R355 Tools
Simpson Strong-Tie
Simpson Strong-Tie® P25SL3 10-Shot Strip Powder Load, 0.25 Caliber, Green, 3 Level, For Use With Hilti® DX35 Power Actuated Tool and R355 Tools

Part #

PLS.25G

MFG Part #

P25SL3

Standard Pack

10M
SENCO® GE21APAX Collated Nail, Paper Tape, Bright Basic
SENCO
SENCO® GE21APAX Collated Nail, Paper Tape, Bright Basic

Part #

GE21APAX

MFG Part #

GE21APAX
Simpson Strong-Tie® PCLDP-125 Ceiling Clip With 1-1/4 in Pin, 0.145 in Dia, 0.3 in Head
Simpson Strong-Tie
Simpson Strong-Tie® PCLDP-125 Ceiling Clip With 1-1/4 in Pin, 0.145 in Dia, 0.3 in Head

Part #

PCC125

MFG Part #

PCLDP-125

Standard Pack

100
Simpson Strong-Tie® PDPW-200 Low Velocity Drive Pin With Metal Washer, 0.145 in Dia x 2 in L Shank, 0.3 in Head
Simpson Strong-Tie
Simpson Strong-Tie® PDPW-200 Low Velocity Drive Pin With Metal Washer, 0.145 in Dia x 2 in L Shank, 0.3 in Head

Part #

PW3200

MFG Part #

PDPW-200

Standard Pack

1000
ÿ
Powers Fasteners
Dewalt® Powers® 50576 Strip Powder Load, 0.25 Cal Caliber, Yellow

Part #

50576

MFG Part #

50576
Simpson Strong-Tie® PDPW-300 Low Velocity Drive Pin With Metal Washer, 0.145 in Dia x 3 in L Shank, 0.3 in Head
Simpson Strong-Tie
Simpson Strong-Tie® PDPW-300 Low Velocity Drive Pin With Metal Washer, 0.145 in Dia x 3 in L Shank, 0.3 in Head

Part #

PW3300

MFG Part #

PDPW-300

Standard Pack

1000
MFTSS030C0040 Threaded Stud, M35x40
Approved Vendor
MFTSS030C0040 Threaded Stud, M35x40

Part #

MFTSS030C0040

MFG Part #

MFTSS030C0040
ÿ
Approved Vendor
PEM® FH-M8X20 Threaded Stud, M8 x 1.25 mm Thread, 20 mm Thread Length

Part #

BFH-M8X20

MFG Part #

FH-M8X20
Dewalt® Powers® 50606 Strip Powder Load, 0.27 Cal Caliber, Purple
Powers Fasteners
Dewalt® Powers® 50606 Strip Powder Load, 0.27 Cal Caliber, Purple

Part #

50606

MFG Part #

50606
ÿ
Powers Fasteners
Dewalt® Powers® 50622 Strip Powder Load, 0.27 Cal Caliber, Green

Part #

50622

MFG Part #

50622
SFH000M412C Flush Head Stud, M4-0.7, 12 mm Thread Length
Approved Vendor
SFH000M412C Flush Head Stud, M4-0.7, 12 mm Thread Length

Part #

SFH000M412C

MFG Part #

SFH000M412C
Dewalt® Powers® 50566 Single Powder Load, 0.25 Cal Caliber, Purple
Powers Fasteners
Dewalt® Powers® 50566 Single Powder Load, 0.25 Cal Caliber, Purple

Part #

50566

MFG Part #

50566
TE-CO® SG5040772 Clamping Stud, 1/2-13 Thread, 1-1/2 in Thread Length
TE-CO Manufacturing
TE-CO® SG5040772 Clamping Stud, 1/2-13 Thread, 1-1/2 in Thread Length

Part #

SG5040772

MFG Part #

SG5040772
MFTSS030C0075 Threaded Stud, M35x75
Approved Vendor
MFTSS030C0075 Threaded Stud, M35x75

Part #

MFTSS030C0075

MFG Part #

MFTSS030C0075
Simpson Strong-Tie® P25SL4 10-Shot Strip Powder Load, 0.25 Caliber, Yellow, 4 Level, For Use With Hilti® DX35 Power Actuated Tool and R355 Tools
Simpson Strong-Tie
Simpson Strong-Tie® P25SL4 10-Shot Strip Powder Load, 0.25 Caliber, Yellow, 4 Level, For Use With Hilti® DX35 Power Actuated Tool and R355 Tools

Part #

PLS.25Y

MFG Part #

P25SL4

Standard Pack

100
Simpson Strong-Tie® PDPT-75 Low Velocity Drive Pin, 0.145 in Dia x 3/4 in L Shank, 0.3 in Head
Simpson Strong-Tie
Simpson Strong-Tie® PDPT-75 Low Velocity Drive Pin, 0.145 in Dia x 3/4 in L Shank, 0.3 in Head

Part #

PT3075

MFG Part #

PDPT-75

Standard Pack

100
Drop-In T-Slot Stud Assembly, M8 x 30, 30 mm Thread Length
Approved Vendor
Drop-In T-Slot Stud Assembly, M8 x 30, 30 mm Thread Length

Part #

/13173

MFG Part #

13173
Simpson Strong-Tie® P27SL3 10-Shot Strip Powder Load, 0.27 Caliber, Green, 3 Level, For Use With P-36B, A-40B, A-41B, Cobra and Most 0.27 Caliber Clone Tools
Simpson Strong-Tie
Simpson Strong-Tie® P27SL3 10-Shot Strip Powder Load, 0.27 Caliber, Green, 3 Level, For Use With P-36B, A-40B, A-41B, Cobra and Most 0.27 Caliber Clone Tools

Part #

PLS.27G

MFG Part #

P27SL3

Standard Pack

100
ÿ
Simpson Strong-Tie
Simpson Strong-Tie® GDP-100KT Drive Pin With Fuel Cell, 0.106 in Dia x 1 in L Shank, 0.24 in Head

Part #

GP100

MFG Part #

GDP-100KT

Standard Pack

5
T-Stud, M8x25
Approved Vendor
T-Stud, M8x25

Part #

13171

MFG Part #

G0815059
Simpson Strong-Tie® P25SL5 10-Shot Strip Powder Load, 0.25 Caliber, Red, 5 Level, For Use With Hilti® DX35 Power Actuated Tool and R355 Tools
Simpson Strong-Tie
Simpson Strong-Tie® P25SL5 10-Shot Strip Powder Load, 0.25 Caliber, Red, 5 Level, For Use With Hilti® DX35 Power Actuated Tool and R355 Tools

Part #

PLS.25R

MFG Part #

P25SL5

Standard Pack

10M
Simpson Strong-Tie® PDP-150 Low Velocity Drive Pin, 0.145 in Dia x 1-1/2 in L Shank, 0.3 in Head
Simpson Strong-Tie
Simpson Strong-Tie® PDP-150 Low Velocity Drive Pin, 0.145 in Dia x 1-1/2 in L Shank, 0.3 in Head

Part #

PR3150

MFG Part #

PDP-150

Standard Pack

1000
TE-CO® SG5040706 Clamping Stud, 1/2-13 Thread, 1-1/2 in Thread Length
TE-CO Manufacturing
TE-CO® SG5040706 Clamping Stud, 1/2-13 Thread, 1-1/2 in Thread Length

Part #

SG5040706

MFG Part #

SG5040706
Collar Stud, 1-1/4-8, 12-5/8 in Thread Length
Approved Vendor
Collar Stud, 1-1/4-8, 12-5/8 in Thread Length

Part #

125U1262STDSPECIAL

MFG Part #

125U1262STDSPECIAL