$ / EACH
Simpson Strong-Tie® WA37300 Wedge-All® Wedge Anchor, 3/8 in Dia, 3 in OAL, 1-7/8 in L Thread, Carbon Steel, Zinc Plated
Part #WAS037C0300Z
MFG #WA37300
UNSPC #31162102
Simpson Strong-Tie® Wedge Anchor, Series: Wedge-All®, 3/8 in Dia, 3 in Overall Length, 1-7/8 in Thread Length, Carbon Steel, Zinc Plated, 1-3/4 in Minimum Embedment Depth, 3/8 in Drill, 9/16 in Head, 570 lb Shear Strength, 261 lb Tensile
- For interior environment, low level of corrosion resistance
- Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
- One-piece, wrap-around clip ensures uniform holding capacity
- Threaded end is chamfered for ease of starting nut
- Available in a wide range of diameters and lengths
- Carbon steel ASTM A563 grade A nut
- The minimum concrete thickness is 1-1/2 times the embedment depth
- The allowable loads are based on a safety factor of 4
- 7/16 in minimum fixture hole
- 30 ft-lb installation torque
- 1560 lb at 2000 psi/2880 lb at 4000 psi ultimate tension loads and 390 lb at 2000 psi, 555 lb at 3000 psi, 720 at 4000 psi allowable tension load for concrete
- 2280 lb at 2000 psi ultimate shear loads and 570 lb at 2000/3000/4000 psi allowable shear load for concrete
- Anchor body material meets minimum 70000 psi tensile strength
Diameter 3/8 in Drill Size 3/8 in Finish Zinc Plated Head Size 9/16 in Material Carbon Steel Minimum Embedment Depth 1-3/4 in Overall Length 3 in Series Wedge-All® Shear Strength 570 lb Tensile Strength 261 lb Thread Length 1-7/8 in Thread Size 3/8-16