Filter

Indexable Face Mills

Showing 64 items

content loaded
Iscar 3106379 Face Mill, 2-1/4 in Overall Length
Iscar
Iscar 3106379 Face Mill, 2-1/4 in Overall Length

Part #

ISC3106379

MFG Part #

3106379
Sandvik Coromant 5739741 Face Milling Cutter, 3 in Cutting Dia, 1 in Shank Dia, 1.9685 in Overall Length, RA245.Rxx Insert, 0.3937 in Maximum Depth of Cut, 1 in Arbor Hole Diameter, 45 deg Lead Angle, Through Coolant (Yes/No): No
Sandvik Coromant
Sandvik Coromant 5739741 Face Milling Cutter, 3 in Cutting Dia, 1 in Shank Dia, 1.9685 in Overall Length, RA245.Rxx Insert, 0.3937 in Maximum Depth of Cut, 1 in Arbor Hole Diameter, 45 deg Lead Angle, Through Coolant (Yes/No): No

Part #

SAN5739741

MFG Part #

5739741
Indexable Face Mill, 2-1/2 in Cutting Dia, 3/4 in Shank Dia, SEKN 42 Insert
Approved Vendor
Indexable Face Mill, 2-1/2 in Cutting Dia, 3/4 in Shank Dia, SEKN 42 Insert

Part #

/ME1480250

MFG Part #

1480250
Iscar 3105589 Face Mill, 3.38 in Overall Length
Iscar
Iscar 3105589 Face Mill, 3.38 in Overall Length

Part #

ISC3105589

MFG Part #

3105589

Standard Pack

1
MOLDINO KIT-ITR4D4032B-5-4 Shell Mill, 2 in Cutting Dia, 2 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter
MOLDINO
MOLDINO KIT-ITR4D4032B-5-4 Shell Mill, 2 in Cutting Dia, 2 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter

Part #

MITSKIT-ITR4D4032B-5-4

MFG Part #

KIT-ITR4D4032B-5-4

Standard Pack

1
Sandvik Coromant 8029445 Face Mill, 0.2933 in Diameter Cutting, 3.937 in Overall Length, 0.1654 in (APMXEFW), 0.0315 in (APMXFFW) Maximum Depth of Cut, 5/8 in Shank Length, Yes Through Coolant
Sandvik Coromant
Sandvik Coromant 8029445 Face Mill, 0.2933 in Diameter Cutting, 3.937 in Overall Length, 0.1654 in (APMXEFW), 0.0315 in (APMXFFW) Maximum Depth of Cut, 5/8 in Shank Length, Yes Through Coolant

Part #

SAN8029445

MFG Part #

8029445
Iscar 5606110 Face Mill, LNMT Insert
Iscar
Iscar 5606110 Face Mill, LNMT Insert

Part #

ISC5606110

MFG Part #

5606110

Standard Pack

1
Sandvik Coromant 5739043 Face Milling Cutter, 2-1/2 in Cutting Dia, 1 in Shank Dia, 1.9685 in Overall Length, RA200.Rxx Insert, 1/4 in Maximum Depth of Cut, 1 in Arbor Hole Diameter, Through Coolant (Yes/No): No
Sandvik Coromant
Sandvik Coromant 5739043 Face Milling Cutter, 2-1/2 in Cutting Dia, 1 in Shank Dia, 1.9685 in Overall Length, RA200.Rxx Insert, 1/4 in Maximum Depth of Cut, 1 in Arbor Hole Diameter, Through Coolant (Yes/No): No

Part #

STIP14-04-5739043

MFG Part #

5739043
Sandvik Coromant 5738765 Face Milling Cutter, 10 in Overall Length, RA210.Oxx Insert, 0.0472 in Maximum Depth of Cut, 1-1/4 in Arbor Hole Diameter, 10 deg Lead Angle, Through Coolant (Yes/No): Yes
Sandvik Coromant
Sandvik Coromant 5738765 Face Milling Cutter, 10 in Overall Length, RA210.Oxx Insert, 0.0472 in Maximum Depth of Cut, 1-1/4 in Arbor Hole Diameter, 10 deg Lead Angle, Through Coolant (Yes/No): Yes

Part #

/SAN5738765

MFG Part #

5738765
KYOCERA KYOCERA 0750-S750-11T Face Mill, 3/4 in Cutting Dia, 3/4 in Shank Dia, 3-1/4 in Overall Length, 3/4 in Maximum Depth of Cut, 90 deg Lead Angle, 2.108 in Shank Length, Yes Through Coolant (Yes/No)
KYOCERA Precision Tools
KYOCERA KYOCERA 0750-S750-11T Face Mill, 3/4 in Cutting Dia, 3/4 in Shank Dia, 3-1/4 in Overall Length, 3/4 in Maximum Depth of Cut, 90 deg Lead Angle, 2.108 in Shank Length, Yes Through Coolant (Yes/No)

Part #

OTM87645

MFG Part #

0750-S750-11T
Walter 7871964 Face Mill Cutter, 100 mm Cutting Dia, 32 mm Shank Dia, 50 mm Overall Length, 10 mm Maximum Depth of Cut, 88 deg Lead Angle
Walter
Walter 7871964 Face Mill Cutter, 100 mm Cutting Dia, 32 mm Shank Dia, 50 mm Overall Length, 10 mm Maximum Depth of Cut, 88 deg Lead Angle

Part #

WAL7871964

MFG Part #

7871964
TOOLMEX® 6901020 Indexable Face Mill, 1-1/2 in Cutting Dia, 3/4 in Shank Dia, 3-1/4 in Overall Length, TPG/TPU/TPC-32 Insert, 1-7/32 in Maximum Depth of Cut
Toolmex Industrial Solutions
TOOLMEX® 6901020 Indexable Face Mill, 1-1/2 in Cutting Dia, 3/4 in Shank Dia, 3-1/4 in Overall Length, TPG/TPU/TPC-32 Insert, 1-7/32 in Maximum Depth of Cut

Part #

YR6901020

MFG Part #

6901020
Iscar 3105322 Face Mill, 1.57 in Overall Length
Iscar
Iscar 3105322 Face Mill, 1.57 in Overall Length

Part #

ISC3105322

MFG Part #

3105322

Standard Pack

1
Iscar 5606396 Face Mill, LNMT Insert
Iscar
Iscar 5606396 Face Mill, LNMT Insert

Part #

ISC5606396

MFG Part #

5606396

Standard Pack

1
Iscar 3194622 Indexable Face Mill, 3.15 in Cutting Dia, 1.968 in Overall Length, LNKX Insert, 0.551 in Maximum Depth of Cut, Through Coolant (Yes/No): Yes
Iscar
Iscar 3194622 Indexable Face Mill, 3.15 in Cutting Dia, 1.968 in Overall Length, LNKX Insert, 0.551 in Maximum Depth of Cut, Through Coolant (Yes/No): Yes

Part #

ISC3194622

MFG Part #

3194622
Iscar 3105178 Face Mill, 0.94 in Overall Length
Iscar
Iscar 3105178 Face Mill, 0.94 in Overall Length

Part #

ISC3105178

MFG Part #

3105178

Standard Pack

1
ÿ
Mitsubishi Materials USA Corp
Mitsubishi Materials USA 517763 Face Mill, 2 in Cutting Dia, AOMT Insert, 0.591 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, 3/4 in Dia Hole Thread, Yes Through Coolant (Yes/No)

Part #

MITS517763

MFG Part #

517763
Iscar 3104978 Indexable Face Mill, 2 in Cutting Dia, 1.57 in Overall Length, HTP LNHT 1606 Insert, 0.118 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, 0, 90 deg Lead Angle, Through Coolant (Yes/No): Yes
Iscar
Iscar 3104978 Indexable Face Mill, 2 in Cutting Dia, 1.57 in Overall Length, HTP LNHT 1606 Insert, 0.118 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, 0, 90 deg Lead Angle, Through Coolant (Yes/No): Yes

Part #

ISC3104978

MFG Part #

3104978

Standard Pack

1
Iscar 3197693 Indexable Face Mill, 2.3 in Cutting Dia, 1-3/4 in Overall Length, FTP-LN10 Insert, 0.071 in Maximum Depth of Cut, Through Coolant (Yes/No): Yes
Iscar
Iscar 3197693 Indexable Face Mill, 2.3 in Cutting Dia, 1-3/4 in Overall Length, FTP-LN10 Insert, 0.071 in Maximum Depth of Cut, Through Coolant (Yes/No): Yes

Part #

ISC3197693

MFG Part #

3197693

Standard Pack

1
ÿ
MOLDINO
MOLDINO IASRS2016R-4 Face Mill, 0.625 in Cutting Dia, 1 in Shank Dia, 5.5 in Overall Length, 2-1/2 in Maximum Depth of Cut, 3 in Shank Length

Part #

HITIASRL2016R-4

MFG Part #

IASRS2016R-4
Sandvik Coromant 5739847 Face Milling Cutter, 1.9448 in Cutting Dia, 3/4 in Shank Dia, 1.969 in Overall Length, RA210.Rxx Insert, 0.0472 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, 10 deg Lead Angle, Through Coolant (Yes/No): Yes
Sandvik Coromant
Sandvik Coromant 5739847 Face Milling Cutter, 1.9448 in Cutting Dia, 3/4 in Shank Dia, 1.969 in Overall Length, RA210.Rxx Insert, 0.0472 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, 10 deg Lead Angle, Through Coolant (Yes/No): Yes

Part #

SAN5739847

MFG Part #

5739847
Iscar 3102101 Indexable Face Mill, 63 mm Cutting Dia, 40 mm Overall Length, ADKT Insert, 14.3 mm Maximum Depth of Cut, Through Coolant (Yes/No): Yes
Iscar
Iscar 3102101 Indexable Face Mill, 63 mm Cutting Dia, 40 mm Overall Length, ADKT Insert, 14.3 mm Maximum Depth of Cut, Through Coolant (Yes/No): Yes

Part #

4041865

MFG Part #

3102101
Sandvik Coromant 5738746 Face Milling Cutter, 5.1406 in Overall Length, RA210.Mxx Insert, 0.0472 in Maximum Depth of Cut, 1 in Arbor Hole Diameter, 10 deg Lead Angle, Through Coolant (Yes/No): Yes
Sandvik Coromant
Sandvik Coromant 5738746 Face Milling Cutter, 5.1406 in Overall Length, RA210.Mxx Insert, 0.0472 in Maximum Depth of Cut, 1 in Arbor Hole Diameter, 10 deg Lead Angle, Through Coolant (Yes/No): Yes

Part #

SAN5738746

MFG Part #

5738746
ÿÿ
KYOCERA Precision Tools
KYOCERA KYOCERA MFWN906000R8T Face Mill, 6 in Cutting Dia, 2.4803 in Overall Length, WNEU, WNGT, WNMU Insert, 0.3150 in Maximum Depth of Cut, 2 in Arbor Hole Diameter

Part #

/KYOTHN04729

MFG Part #

MFWN906000R8T
Iscar 3106379 Face Mill, 2-1/4 in Overall Length
Iscar
Iscar 3106379 Face Mill, 2-1/4 in Overall Length

Part #

ISC3106379

MFG Part #

3106379
Sandvik Coromant 5739741 Face Milling Cutter, 3 in Cutting Dia, 1 in Shank Dia, 1.9685 in Overall Length, RA245.Rxx Insert, 0.3937 in Maximum Depth of Cut, 1 in Arbor Hole Diameter, 45 deg Lead Angle, Through Coolant (Yes/No): No
Sandvik Coromant
Sandvik Coromant 5739741 Face Milling Cutter, 3 in Cutting Dia, 1 in Shank Dia, 1.9685 in Overall Length, RA245.Rxx Insert, 0.3937 in Maximum Depth of Cut, 1 in Arbor Hole Diameter, 45 deg Lead Angle, Through Coolant (Yes/No): No

Part #

SAN5739741

MFG Part #

5739741
Indexable Face Mill, 2-1/2 in Cutting Dia, 3/4 in Shank Dia, SEKN 42 Insert
Approved Vendor
Indexable Face Mill, 2-1/2 in Cutting Dia, 3/4 in Shank Dia, SEKN 42 Insert

Part #

/ME1480250

MFG Part #

1480250
Iscar 3105589 Face Mill, 3.38 in Overall Length
Iscar
Iscar 3105589 Face Mill, 3.38 in Overall Length

Part #

ISC3105589

MFG Part #

3105589

Standard Pack

1
MOLDINO KIT-ITR4D4032B-5-4 Shell Mill, 2 in Cutting Dia, 2 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter
MOLDINO
MOLDINO KIT-ITR4D4032B-5-4 Shell Mill, 2 in Cutting Dia, 2 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter

Part #

MITSKIT-ITR4D4032B-5-4

MFG Part #

KIT-ITR4D4032B-5-4

Standard Pack

1
Sandvik Coromant 8029445 Face Mill, 0.2933 in Diameter Cutting, 3.937 in Overall Length, 0.1654 in (APMXEFW), 0.0315 in (APMXFFW) Maximum Depth of Cut, 5/8 in Shank Length, Yes Through Coolant
Sandvik Coromant
Sandvik Coromant 8029445 Face Mill, 0.2933 in Diameter Cutting, 3.937 in Overall Length, 0.1654 in (APMXEFW), 0.0315 in (APMXFFW) Maximum Depth of Cut, 5/8 in Shank Length, Yes Through Coolant

Part #

SAN8029445

MFG Part #

8029445
Iscar 5606110 Face Mill, LNMT Insert
Iscar
Iscar 5606110 Face Mill, LNMT Insert

Part #

ISC5606110

MFG Part #

5606110

Standard Pack

1
Sandvik Coromant 5739043 Face Milling Cutter, 2-1/2 in Cutting Dia, 1 in Shank Dia, 1.9685 in Overall Length, RA200.Rxx Insert, 1/4 in Maximum Depth of Cut, 1 in Arbor Hole Diameter, Through Coolant (Yes/No): No
Sandvik Coromant
Sandvik Coromant 5739043 Face Milling Cutter, 2-1/2 in Cutting Dia, 1 in Shank Dia, 1.9685 in Overall Length, RA200.Rxx Insert, 1/4 in Maximum Depth of Cut, 1 in Arbor Hole Diameter, Through Coolant (Yes/No): No

Part #

STIP14-04-5739043

MFG Part #

5739043
Sandvik Coromant 5738765 Face Milling Cutter, 10 in Overall Length, RA210.Oxx Insert, 0.0472 in Maximum Depth of Cut, 1-1/4 in Arbor Hole Diameter, 10 deg Lead Angle, Through Coolant (Yes/No): Yes
Sandvik Coromant
Sandvik Coromant 5738765 Face Milling Cutter, 10 in Overall Length, RA210.Oxx Insert, 0.0472 in Maximum Depth of Cut, 1-1/4 in Arbor Hole Diameter, 10 deg Lead Angle, Through Coolant (Yes/No): Yes

Part #

/SAN5738765

MFG Part #

5738765
KYOCERA KYOCERA 0750-S750-11T Face Mill, 3/4 in Cutting Dia, 3/4 in Shank Dia, 3-1/4 in Overall Length, 3/4 in Maximum Depth of Cut, 90 deg Lead Angle, 2.108 in Shank Length, Yes Through Coolant (Yes/No)
KYOCERA Precision Tools
KYOCERA KYOCERA 0750-S750-11T Face Mill, 3/4 in Cutting Dia, 3/4 in Shank Dia, 3-1/4 in Overall Length, 3/4 in Maximum Depth of Cut, 90 deg Lead Angle, 2.108 in Shank Length, Yes Through Coolant (Yes/No)

Part #

OTM87645

MFG Part #

0750-S750-11T
Walter 7871964 Face Mill Cutter, 100 mm Cutting Dia, 32 mm Shank Dia, 50 mm Overall Length, 10 mm Maximum Depth of Cut, 88 deg Lead Angle
Walter
Walter 7871964 Face Mill Cutter, 100 mm Cutting Dia, 32 mm Shank Dia, 50 mm Overall Length, 10 mm Maximum Depth of Cut, 88 deg Lead Angle

Part #

WAL7871964

MFG Part #

7871964
TOOLMEX® 6901020 Indexable Face Mill, 1-1/2 in Cutting Dia, 3/4 in Shank Dia, 3-1/4 in Overall Length, TPG/TPU/TPC-32 Insert, 1-7/32 in Maximum Depth of Cut
Toolmex Industrial Solutions
TOOLMEX® 6901020 Indexable Face Mill, 1-1/2 in Cutting Dia, 3/4 in Shank Dia, 3-1/4 in Overall Length, TPG/TPU/TPC-32 Insert, 1-7/32 in Maximum Depth of Cut

Part #

YR6901020

MFG Part #

6901020
Iscar 3105322 Face Mill, 1.57 in Overall Length
Iscar
Iscar 3105322 Face Mill, 1.57 in Overall Length

Part #

ISC3105322

MFG Part #

3105322

Standard Pack

1
Iscar 5606396 Face Mill, LNMT Insert
Iscar
Iscar 5606396 Face Mill, LNMT Insert

Part #

ISC5606396

MFG Part #

5606396

Standard Pack

1
Iscar 3194622 Indexable Face Mill, 3.15 in Cutting Dia, 1.968 in Overall Length, LNKX Insert, 0.551 in Maximum Depth of Cut, Through Coolant (Yes/No): Yes
Iscar
Iscar 3194622 Indexable Face Mill, 3.15 in Cutting Dia, 1.968 in Overall Length, LNKX Insert, 0.551 in Maximum Depth of Cut, Through Coolant (Yes/No): Yes

Part #

ISC3194622

MFG Part #

3194622
Iscar 3105178 Face Mill, 0.94 in Overall Length
Iscar
Iscar 3105178 Face Mill, 0.94 in Overall Length

Part #

ISC3105178

MFG Part #

3105178

Standard Pack

1
ÿ
Mitsubishi Materials USA Corp
Mitsubishi Materials USA 517763 Face Mill, 2 in Cutting Dia, AOMT Insert, 0.591 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, 3/4 in Dia Hole Thread, Yes Through Coolant (Yes/No)

Part #

MITS517763

MFG Part #

517763
Iscar 3104978 Indexable Face Mill, 2 in Cutting Dia, 1.57 in Overall Length, HTP LNHT 1606 Insert, 0.118 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, 0, 90 deg Lead Angle, Through Coolant (Yes/No): Yes
Iscar
Iscar 3104978 Indexable Face Mill, 2 in Cutting Dia, 1.57 in Overall Length, HTP LNHT 1606 Insert, 0.118 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, 0, 90 deg Lead Angle, Through Coolant (Yes/No): Yes

Part #

ISC3104978

MFG Part #

3104978

Standard Pack

1
Iscar 3197693 Indexable Face Mill, 2.3 in Cutting Dia, 1-3/4 in Overall Length, FTP-LN10 Insert, 0.071 in Maximum Depth of Cut, Through Coolant (Yes/No): Yes
Iscar
Iscar 3197693 Indexable Face Mill, 2.3 in Cutting Dia, 1-3/4 in Overall Length, FTP-LN10 Insert, 0.071 in Maximum Depth of Cut, Through Coolant (Yes/No): Yes

Part #

ISC3197693

MFG Part #

3197693

Standard Pack

1
ÿ
MOLDINO
MOLDINO IASRS2016R-4 Face Mill, 0.625 in Cutting Dia, 1 in Shank Dia, 5.5 in Overall Length, 2-1/2 in Maximum Depth of Cut, 3 in Shank Length

Part #

HITIASRL2016R-4

MFG Part #

IASRS2016R-4
Sandvik Coromant 5739847 Face Milling Cutter, 1.9448 in Cutting Dia, 3/4 in Shank Dia, 1.969 in Overall Length, RA210.Rxx Insert, 0.0472 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, 10 deg Lead Angle, Through Coolant (Yes/No): Yes
Sandvik Coromant
Sandvik Coromant 5739847 Face Milling Cutter, 1.9448 in Cutting Dia, 3/4 in Shank Dia, 1.969 in Overall Length, RA210.Rxx Insert, 0.0472 in Maximum Depth of Cut, 3/4 in Arbor Hole Diameter, 10 deg Lead Angle, Through Coolant (Yes/No): Yes

Part #

SAN5739847

MFG Part #

5739847
Iscar 3102101 Indexable Face Mill, 63 mm Cutting Dia, 40 mm Overall Length, ADKT Insert, 14.3 mm Maximum Depth of Cut, Through Coolant (Yes/No): Yes
Iscar
Iscar 3102101 Indexable Face Mill, 63 mm Cutting Dia, 40 mm Overall Length, ADKT Insert, 14.3 mm Maximum Depth of Cut, Through Coolant (Yes/No): Yes

Part #

4041865

MFG Part #

3102101
Sandvik Coromant 5738746 Face Milling Cutter, 5.1406 in Overall Length, RA210.Mxx Insert, 0.0472 in Maximum Depth of Cut, 1 in Arbor Hole Diameter, 10 deg Lead Angle, Through Coolant (Yes/No): Yes
Sandvik Coromant
Sandvik Coromant 5738746 Face Milling Cutter, 5.1406 in Overall Length, RA210.Mxx Insert, 0.0472 in Maximum Depth of Cut, 1 in Arbor Hole Diameter, 10 deg Lead Angle, Through Coolant (Yes/No): Yes

Part #

SAN5738746

MFG Part #

5738746
ÿÿ
KYOCERA Precision Tools
KYOCERA KYOCERA MFWN906000R8T Face Mill, 6 in Cutting Dia, 2.4803 in Overall Length, WNEU, WNGT, WNMU Insert, 0.3150 in Maximum Depth of Cut, 2 in Arbor Hole Diameter

Part #

/KYOTHN04729

MFG Part #

MFWN906000R8T